Monday, June 23, 2008
Monday, May 26, 2008
Manufacturing Process Assessment
The Assessment on the Mfg Process will be based on:
1. Identify 2 Mfg Processes clearly defined (20%)
2. Amount of research work carried out (20%)
3. Illustrations with pictures, diagrams and videos (20%)
4. presentation by individual (20%)
5. Teamwork in power point (20%)
1. Identify 2 Mfg Processes clearly defined (20%)
2. Amount of research work carried out (20%)
3. Illustrations with pictures, diagrams and videos (20%)
4. presentation by individual (20%)
5. Teamwork in power point (20%)
Wednesday, May 14, 2008
Mfg Process _Week 7 Presentation
Please find attached the copy for the Manufacturing Process Assignment,
please remember to work as a team and complete this assignment by
week 7,i.e by 27-May-08.
------------------------------------------------------------------------
Case Study on Manufacturing Processes (5%)
Group Presentation on week 07
Requirement:
In a group of 4 to 5 students, you are requested to work as a team, research on any two manufacturing processes. Study the description of the process, understand the process capabilities and its limitations, know the applications of the process and share with the whole class.
Your group presentation could be in power point form, and the soft copy has to be submitted to your lecturer.
Your choices of manufacturing processes should be different from the other groups of your class, please discuss with your lecturer.
List of some of the manufacturing processes for your reference
1. Metal Machining
a) Turning
b) Milling
c) Grinding
d) Drilling
e) Taping
f) Broaching etc.
g) Polishing
2. Metal Stamping
a) Blanking and piercing
b) Bending and forming
c) Deep drawing
d) Coining and compression
e) Progressive stamping
f) Transfer die stamping
g) NC turret punching, laser cutting
h) Press brake etc
3. Plastic Moulding
a) Compression moulding
b) Plastic injection moulding
c) Blow moulding etc
4 Casting
a) Sand casting
b) Die casting
c) Shell mould casting
d) Investment casting (lost wax) etc
5. Die casting
a) Cold chamber
b) Hot Chamber etc
6 Forging
7 Wire drawing
8 Extrusion
9. Joining processes
a) Welding
b) Riveting
c) Adhesive joining etc
d) Bolt and nut, screws etc
10. Power Metallurgy
Sintering process.
11. Heat Treatment
a) Hardening
b) Case Hardening, surface hardening
c) Tempering, stress relieving etc
12. Surface Treatment
a) Electroplating
b) Chemical, Physical vapour despositing
please remember to work as a team and complete this assignment by
week 7,i.e by 27-May-08.
------------------------------------------------------------------------
Case Study on Manufacturing Processes (5%)
Group Presentation on week 07
Requirement:
In a group of 4 to 5 students, you are requested to work as a team, research on any two manufacturing processes. Study the description of the process, understand the process capabilities and its limitations, know the applications of the process and share with the whole class.
Your group presentation could be in power point form, and the soft copy has to be submitted to your lecturer.
Your choices of manufacturing processes should be different from the other groups of your class, please discuss with your lecturer.
List of some of the manufacturing processes for your reference
1. Metal Machining
a) Turning
b) Milling
c) Grinding
d) Drilling
e) Taping
f) Broaching etc.
g) Polishing
2. Metal Stamping
a) Blanking and piercing
b) Bending and forming
c) Deep drawing
d) Coining and compression
e) Progressive stamping
f) Transfer die stamping
g) NC turret punching, laser cutting
h) Press brake etc
3. Plastic Moulding
a) Compression moulding
b) Plastic injection moulding
c) Blow moulding etc
4 Casting
a) Sand casting
b) Die casting
c) Shell mould casting
d) Investment casting (lost wax) etc
5. Die casting
a) Cold chamber
b) Hot Chamber etc
6 Forging
7 Wire drawing
8 Extrusion
9. Joining processes
a) Welding
b) Riveting
c) Adhesive joining etc
d) Bolt and nut, screws etc
10. Power Metallurgy
Sintering process.
11. Heat Treatment
a) Hardening
b) Case Hardening, surface hardening
c) Tempering, stress relieving etc
12. Surface Treatment
a) Electroplating
b) Chemical, Physical vapour despositing
Monday, May 5, 2008
Friday, May 2, 2008
Tuesday, April 29, 2008
Global Warming Assessment
A Great Job well done for all teams.
Again I have enjoyed very much on your blogs and presentations.
Hope to see more of you guys presenting and activities.
Here are the grades from the presentation (very competitive):
1) Bananas: 87 / 100
2) Dementium: 84 / 100
3) Anything: 86 / 100
4) Give me Shoemakers: 89 / 100
5) Mattew Team: 86 / 100
Keep it Up.
Thanks Guys
Again I have enjoyed very much on your blogs and presentations.
Hope to see more of you guys presenting and activities.
Here are the grades from the presentation (very competitive):
1) Bananas: 87 / 100
2) Dementium: 84 / 100
3) Anything: 86 / 100
4) Give me Shoemakers: 89 / 100
5) Mattew Team: 86 / 100
Keep it Up.
Thanks Guys
Friday, April 25, 2008
Wednesday, April 23, 2008
Blog Creation By Team
Dear Students
Blog Project
As we continue with this journey of I2E, I would like students in the
teams create a blog for their team.
You may go to www.blogspot.com
to create the blogs.
For a start please let me have the blog name so that I can link to
this main I2E blog.
1. Dementium
2. Anything
3. Give Me Shoemakers
4. Bananas
5. Jeremyteam
One of the main objective is to allow teams to post learning findings
and post solutions of any subject matters.
We will discuss this further when I see you.
Cheers. Rgds
Blog Project
As we continue with this journey of I2E, I would like students in the
teams create a blog for their team.
You may go to www.blogspot.com
to create the blogs.
For a start please let me have the blog name so that I can link to
this main I2E blog.
1. Dementium
2. Anything
3. Give Me Shoemakers
4. Bananas
5. Jeremyteam
One of the main objective is to allow teams to post learning findings
and post solutions of any subject matters.
We will discuss this further when I see you.
Cheers. Rgds
Monday, April 21, 2008
The Worldof Engineering
Activity 01:
1) Form into your teams
2) Each group will be given a topic card (on a particular research topic)
3) Spend 20 mins to discuss
4) Type findings into the Blog under, "Comments"
(10 mins)
5) Then nominate one person from each group to present
(5 mins each group : total 25 mins)
1) Form into your teams
2) Each group will be given a topic card (on a particular research topic)
3) Spend 20 mins to discuss
4) Type findings into the Blog under, "Comments"
(10 mins)
5) Then nominate one person from each group to present
(5 mins each group : total 25 mins)
Wednesday, April 16, 2008
Car Rear Wings
Contribution from Asdf154:
http://auto.howstuffworks.com/four-wheel-drive1.htm
Explanation from Asdf154:
see the wheel slip animation. without the rear wings, the grip would be less, so the wheels slip. with the wings, it pushes the air up, so got downward force on the car (equal and opposite reaction), so the wheels got better grip, so less wheel slip.
Subscribe to:
Posts (Atom)